Curing Agent
keywords
Epoxy equivalent weight(g/eq): 184-190 Viscosity: 11000-15000mPa.s/25 ℃ Color:<1 Gardner PACKING:240KG DRUM ★ Recognizes as a standard epoxy resin from BPA and ECH ★ Offer maximum mechanical strength, good chemical resistance and excellent heat resistance ★ Used in Laminates, Filament winding, Encapsulation ★ Civil engineering, Coatings and Adhesives
keywords
Epoxy equivalent weight (g/eq): 460-490 Color: ≤1 Gardner Softening point (℃): 65-68 PACKING: 25KG BAG ★ A solid epoxy resin, based on BPA and ECH ★ In combination with polyester to obtain good gloss, flow, mechanical properties and chemical resistance ★ Suitable for Various paints, Anti-corrosive industrial paint, Insulation powder coating, Epoxy primer coating, Epoxy top coating, Adhesives and Composites
keywords
Assay:≥ 98.5% Water: ≤0.2% AHEW: 29 Total amine value: 900mgKOH/g PACKING: 160KG ★ As a new type of cost-effective curing agent, two different primary amine groups in the molecular structure exhibit different reactivity ★ Fast curing, low adduct viscosity and good flexibility ★ Widely used in structural sealant, composite materials, floor coatings and other industries
keywords
Total amine value: 450-500mgKOH/g Viscosity:400-800mPa.s/25 ℃ Packing:25KG OR 200KG DRUM ★ Fast curing in low temperature with phenolic hydroxyl group ★ Novolac structure enhance the heat resistance ★ Widely use in anti-corrosion, adhesive, intermediate and primer coat
keywords
Characteristic: White crystal powder Water: ≤0.5% Assay: ≥99% PACKING: 25KG DRUM ★ A latency curing agent with higher cost performance ★ Pentacylic molecular structure with secondary amine and tertiary amine ★ Widely used in epoxy encapsulation materials, epoxy casting materials and powder coating
keywords
High 99.95% purity minimum PACKING:210KG DRUM, 1000KG or 1050KG IBC, 25MT ISO tank ★ Reactive diluent with good heat resistance ★ Reduce the viscosity of epoxy resin ★ Suitable for Epoxy floor coatings, Epoxy potting material and Epoxy structural adhesives
keywords
According to the statistics of the Prospective Industry Research Institute, in 2010, the production capacity of China's catalyst industry was 216000 tons, with a capacity utilization rate of 65%. With the elimination of outdated production capacity, the capacity utilization rate of China's catalyst industry is gradually increasing. In 2019, China's catalyst production capacity was approximately 502000 tons.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
As an important component of the new materials industry, catalysts benefit from the direct support of national and local governments for the research and development upgrading and industrialization of the new materials industry, with good development prospects.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
The bisphenol A market has fallen repeatedly, and the entire industry chain has shown no positive results. Terminal support is difficult, and demand is poor. Accompanied by the sharp drop in oil prices, the industry chain is releasing negative news, and the market lacks effective positive support. It is expected that there is still room for a downward trend in the short-term market.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
Market Development and Future Forecast of China's Epoxy Resin Industry in 2023
According to the "Market Research and Investment Evaluation Report on China's Epoxy Resin Industry (2023 Edition)" released by Limu Information Consulting, epoxy resin is a type of oligomer with two or more epoxy groups in its molecules, which can be used in combination with various curing agents such as amines, imidazoles, anhydride, phenolic resin, etc. to form a three-dimensional network cured product.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
According to a recent research report released by Future Market Insights, a market research and consulting firm certified by ESOMAR, the global epoxy curing agent market is worth approximately 2.45 billion US dollars and is expected to exceed 4 billion US dollars by the end of 2028. In terms of value, the market is expected to exhibit a gradual compound annual growth rate of 5% during the evaluation period from 2022 to 2028. The successful emergence of bio based and water-based epoxy resin curing agents is expected to drive the market in the next 10 years.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
Discussion on the Characteristics of Epoxy Resin Colored Sand Floor Coatings
Nowadays, due to the rapid development of solvent free liquid epoxy resin and the completeness of floor construction technology and equipment, epoxy resin is widely used in part-time floor decoration.
keywords
Epoxy Resin
Curing Agent
Advanced Materials
raw chemical material
Latest news